Click here to jump directly to the different traverses :
For traverses inquiry form click here.
Binding regulations for load handling attachments are BGR 500, DIN EN 13155 and the
DIN 15428. DoLast traverses for suspension in crane hooks or as load-bearing means in lifting beam cranes are solid steel beam constructions, which are manufactured according to DIN 15018 by certified welders . DoLast trusses must be inspected by an expert according to BetrSich V depending on the intensity of use, but at least once a year . The basis for this test is DIN 15429 (Lifting gear, Load lifting equipment, monitoring in use). Repairs may only be carried out by Dolezych. As a manufacturer of traverses and lifting gear we guarantee the proper execution of all required work.
Off-center slinging of loads on DoLast traverses:
If the DoLast traverse does not hang above the center of gravity of the load, the load can slip out of the sling. One-sided traverses suspension means: Danger! The angle of inclination of two strands of a sling must never exceed 60° .
If this angle is exceeded, danger is imminent ! The load on the single strand becomes greater than the total force exerted by the load . DoLast traverses allow low lifting heights , so that in low halls can be attached. In the case of long loads, this means that angles of inclination of the lifting gear can be avoided altogether. Under DoLast crossbeams, the load must be supported in such a way that it cannot bend excessively or individual parts can detach themselves from the load structure and fall out.
DoLast traverses are used to avoid unacceptable tilt angles.
When using a DoLast traverses, the full load capacity of the sling is always used because the strands hang vertically.
Slinging with reversed angle of inclination:
The slinging equipment can slip away to the outside under the load: Danger!
Article no. | Load capacity kg | Dimensions mm | Weight approx. kg | |||||
AB | GL | H | LW | B | R | |||
08110010 | 1.000 | 1.000 | 1.050 | 380 | 125 | 55 | 55 | 14 |
08122510 | 1.000 | 2.500 | 2.570 | 420 | 125 | 55 | 75 | 39 |
08116016 | 1.600 | 1.600 | 1.670 | 420 | 125 | 55 | 75 | 27 |
08131016 | 1.600 | 3.150 | 3.220 | 460 | 125 | 55 | 90 | 66 |
08140025 | 2.500 | 4.000 | 4.090 | 570 | 150 | 60 | 110 | 120 |
08125040 | 4.000 | 2.500 | 2.600 | 600 | 175 | 70 | 110 | 81 |
08150040 | 4.000 | 5.000 | 5.100 | 680 | 175 | 70 | 150 | 230 |
08150063 | 6.300 | 5.000 | 5.110 | 820 | 210 | 85 | 170 | 316 |
DoLast traverses with higher load capacity and larger working width please inquire. We manufacture custom-made traverses for you in all designs.
According to DIN EN 13155 point 5.1.5, a load handling device must be stored in a stable manner when not in use. Of course, we can offer you suitable storage places on request.
For truss inquiry form click here.
Article no. | Load capacity kg | Dimensions mm | Weight approx. kg | ||||||
AB | GL | H | LH | LW | B | R | |||
08510010 | 1.000 | 1.000 | 1.050 | 380 | 125 | 55 | 260 | 150 | 25 |
08525010 | 1.000 | 2.500 | 2.570 | 420 | 125 | 55 | 260 | 150 | 46 |
08516016 | 1.600 | 1.600 | 1.670 | 420 | 125 | 55 | 260 | 200 | 36 |
08531016 | 1.600 | 3.150 | 3.220 | 460 | 125 | 55 | 290 | 200 | 80 |
08540025 | 2.500 | 4.000 | 4.090 | 570 | 150 | 60 | 330 | 200 | 165 |
08525040 | 4.000 | 2.500 | 2.600 | 600 | 175 | 70 | 400 | 250 | 120 |
08550040 | 4.000 | 5.000 | 5.100 | 680 | 175 | 70 | 430 | 250 | 268 |
08550063 | 6.300 | 5.000 | 5.110 | 820 | 210 | 85 | 500 | 250 | 416 |
With standarddesigns cannot cover all applications:
Dolezych has extensive practical experience in special traverse construction and is available to provide advice and assistance.
For truss inquiry form click here.
item number | Support capability kg |
Working br. Main beam mm |
Res.position Main beam mm |
Working width Cross member mm |
Res.position Cross member mm |
Weight approx. kg |
Type 311 H | ||||||
08311120 | 1.000 | 2.000 | – | 1.000 | – | 55 |
08311252 | 2.500 | 2.000 | – | 1.000 | – | 90 |
08311253 | 2.500 | 3.000 | – | 2.000 | – | 150 |
08311503 | 5.000 | 3.000 | – | 2.000 | – | 225 |
08311504 | 5.000 | 4.000 | – | 2.000 | – | 295 |
08311505 | 5.000 | 5.000 | – | 2.500 | – | 390 |
08311755 | 7.500 | 5.000 | – | 2.500 | – | 445 |
08311756 | 7.500 | 6.000 | – | 3.000 | – | 640 |
08311104 | 10.000 | 4.000 | – | 2.500 | – | 510 |
08311106 | 10.000 | 6.000 | – | 3.000 | – | 750 |
08311156 | 15.000 | 6.000 | – | 3.000 | – | 910 |
Type 316 H | max.-min. | max.-min. | ||||
08316012 | 1.000 | 2.000 x 1.000 | 4 x 125 | 1.000 x 500 | 2 x 125 | 90 |
08316022 | 2.500 | 2.000 x 1.000 | 2 x 125 | 1.000x 500 | 2 x 125 | 140 |
08316023 | 2.500 | 3.000 x 1.000 | 4 x 250 | 2.000 x 1.000 | 4 x 125 | 230 |
08316053 | 5.000 | 3.000 x 1.000 | 4 x 250 | 2.000 x 1.000 | 2 x 250 | 340 |
08316054 | 5.000 | 4.000 x 1.000 | 6 x 250 | 2.000 x 1.000 | 4 x 250 | 450 |
08316055 | 5.000 | 5.000 x 1.500 | 8 x 250 | 2.500 x 1.000 | 8 x 250 | 600 |
08316075 | 7.500 | 5.000 x 1.500 | 7 x 250 | 2.500 x 1.000 | 4 x 250 | 680 |
08316076 | 7.500 | 6.000 x 2.000 | 9 x 250 | 3.000 x 1.000 | 6 x 250 | 980 |
08316104 | 10.000 | 4.000 x 1.000 | 5 x 250 | 2.500 x 1.000 | 4 x 250 | 775 |
08316106 | 10.000 | 6.000 x 2.000 | 6 x 250 | 3.000 x 1.000 | 6 x 250 | 1.150 |
08316156 | 15.000 | 6.000 x 2.000 | 4 x 500 | 3.000 x 1.000 | 4 x 300 | 1.400 |
The above DoLast traverse is available with single-point suspension and 4 swiveling eye load hooks with safety device. Design in strong sectional steel construction with 2 cross beams adjustable in raster and 2 adjustment lugs. The traverse hanger can be disassembled for transport, i.e. cross beams and the lug hangers can be removed . Supplied with fully assembled crossheads, with nameplate and load capacity labeling.
For truss inquiry form click here.
The version intended for single transport of skeleton containers has two rigid suspension hooks each and two swivel suspension hooks connected to a handle bar . It can be latched and unlatched to the pallet cage by a single slinger.
Article no. | Load capacity kg | Approx. dimensions in mm | Weight approx. kg |
||||
B | H | I | L | V | |||
08170010 | 1.000 | 600 | 360 | 150 | 1200 | 120 | 40 |
08170020 | 2.000 | 600 | 380 | 160 | 1200 | 120 | 45 |
08170030 | 3.000 | 600 | 450 | 160 | 1200 | 150 | 65 |
For truss inquiry form click here.
Article no. | Load capacity kg | Working dimensions mm | Weight ca.kg |
08111110 | 1.000 | 2.000 x 1.000 | 100 |
08111120 | 2.000 | 3.000 x 1.500 | 150 |
08111130 | 3.000 | 4.000 x 2.000 | 280 |
For truss inquiry form click here.
with 4 pieces YAS weld-on hooks with safety device for BigBags
With 4 pieces head plates, for big bags, easy to hook and unhook.
With 4-strand chain suspension or welded single-point suspension to accommodate mesh boxes, big bags, etc.
Type | Article no. | Load capacity kg | Working dimensions mm | Weight kg |
209 | 08110905 | 500 | 1.000 x 1.000 | 20 |
209 | 08110910 | 1.000 | 1.000 x 1.000 | 23 |
210 | 08112104 | 500 | 1.000 x 1.000 | 18 |
210 | 08112110 | 1.000 | 1.000 x 1.000 | 20 |
211 | 08212015 | 500 | 1.000 x 1.000 | 15 |
211 | 08112011 | 1.000 | 1.000 x 1.000 | 25 |
For truss inquiry form click here.
Single-point suspension, manually adjustable in width , with Dolezych endless round slings. DoLast turning traverses can be equipped with electric motors in all load capacity classes . For mechanical turning two employees are necessary, for electric motorized turning only one employee moves the load – please inquire .
Article no. | Load capacity kg |
Working width mm |
Grid mm |
Weight approx. kg |
08121810 | 1.000 | 1.000 | 2 x 150 | 25 |
08121614 | 1.000 | 1.600 | 3 x 150 | 34 |
08121811 | 1.000 | 2.500 | 5 x 150 | 46 |
08121813 | 1.000 | 3.150 | 7 x 150 | 56 |
08121816 | 1.600 | 1.600 | 2 x 200 | 36 |
08121818 | 1.600 | 3.150 | 5 x 200 | 80 |
08121627 | 1.600 | 4.000 | 7 x 200 | 97 |
08121825 | 2.500 | 2.500 | 4 x 200 | 84 |
08121826 | 2.500 | 3.150 | 5 x 200 | 100 |
08121626 | 2.500 | 4.000 | 7 x 200 | 165 |
08121828 | 2.500 | 5.000 | 9 x 200 | 197 |
08121840 | 4.000 | 2.500 | 3 x 250 | 120 |
08121841 | 4.000 | 3.150 | 4 x 250 | 141 |
08121842 | 4.000 | 4.000 | 6 x 250 | 224 |
08121843 | 4.000 | 5.000 | 7 x 250 | 268 |
08121863 | 6.300 | 3.150 | 4 x 250 | 227 |
08121864 | 6.300 | 4.000 | 6 x 250 | 271 |
08121865 | 6.300 | 5.000 | 7 x 250 | 416 |
08121866 | 6.300 | 6.300 | 9 x 250 | 505 |
For truss inquiry form click here.
Ignorance when handling heavy or awkward parts is often the beginning of the end. If loads are moved, turned or rotated with a “jerk of the wrist” and inadequate work equipment, it does not take long for an accident to occur. Prevention is better! Use DoLast turners, with the help of which your valuable goods can be turned and rotated safely and professionally – gently and softly.
For truss inquiry form click here.
Loading gear for Do 112 container spreader bar, with container hook CH-3, suitable for 20 ft. and 40 ft. Container in left and right version.
Article no. | Load capacity kg |
08172100 | 10.000 |
08172200 | 20.000 |
Chain harness
Article no. | Load capacity kg | Container ft. |
Length m |
Execution |
29991301 | 10 | 20 | 4,5 | li |
29991901 | 20 | 20 | 4,5 | li |
29991311 | 10 | 40 | 7,5 | re |
29991911 | 20 | 40 | 7,5 | re |
Wire rope harness
Article no. | Load capacity kg |
Container ft. |
Length m |
Execution |
09992401 | 10 | 20 | 4,5 | li |
22993601 | 20 | 20 | 4,5 | li |
22992411 | 10 | 40 | 7,5 | re |
22993511 | 20 | 40 | 7,5 | re |
For truss inquiry form click here.
Please visit the following pages:
Or ask us directly:
Phone: + 49 (0) 231 81 81
Fax: + 49 (0) 231 82 77 82
Email: info@dolezych.de
Bleiben Sie auf dem Laufenden mit dem Dolezych-Newsletter! Hier geht’s zur Anmeldung.