Edge protectors from Dolezych
Why edge protection?
Edge protection is essential to protect the webbing of ratchet straps, lifting slings and round slings from dangerous fabric cuts caused by sharp edges and/or to protect the goods being transported. An edge is sharp if the edge radius of the load is smaller than the diameter of the lifting strap, rope or lifting chain.
Edge protectors for load securing
Edge protectors ensure optimum load securing in trucks, vans and the like. They protect sensitive goods such as paper rolls, chipboard or rigib board from damage by tensioning and ratchet straps by providing uniform pressure distribution over a larger area. The range of materials for edge protectors for transport securing is diverse. From aluminum edge protectors to rubber edge protectors, you will find what you are looking for. But not only the cargo should be secured against damage. A ratchet strap also experiences friction during use against, for example, sharp-edged cargoes, which leads to damage to the weave structure. This wear can be additionally avoided by abrasion protection hoses or edge protection hoses. The following video gives again a small overview of the possibilities:
Edge protectors for lifting slings, round slings, chains and ropes
A textile profile hose coated with at least 5 mm thick polyurethane can be fitted to protect the lifting strap and round sling. Alternatively, a lifting slingcan also be firmly encapsulated with at least 5 mm thick polyurethane per lifting belt side. This coating is firmly fixed on the lifting belt. All fixed coatings and profiled hoses can be additionally equipped with granulate surface protection or with a surface roughening to increase slip resistance.
Cutting of chains and ropes due to sharp edges can also be easily prevented by Dolezych edge protectors.
Discover our shop selection or request a non-binding offer:
Click here to jump directly to the different types of edge protectors:
Edge protection for load securing
Edge protection angle
DoLight plastic edge protection angle
- for the transport of standing, lying or edge-pressure sensitive loads such as paper rolls
- for belt width 50mm
- high-quality, technical ABS plastic from the automotive industry
- unbreakable, dimensionally stable, stackable and proven thousands of times in practice
- Improvement of the deflection factor “k” during tie-down lashing to k = 1.8
- Belt fixation by side guide
- Shifting of pressure point due to raised side parts
- no edge damage due to hollow edge
- Dimension 185 x 145 x 150 mm
- Weight approx. 285 g
| Article no. |
| 0600 0062 |
DoLight PP edge protection angle
- Suitable for transporting upright, horizontal or edge-pressure-sensitive loads such as paper rolls in accordance with BGL and vdp recommendations
- for belt width 50 mm
- high quality plastic, polypropylene (PP)
- unbreakable, stackable and field-tested
- Improvement of the deflection factor “k” during tie-down lashing to k = 1.8
- Belt fixation by side guide
- Shifting of pressure point due to raised side parts
- no edge damage due to hollow space inside
- Dimension 185 x 145 x 150 mm
- Weight approx. 220 g
| Article no. |
| 0600 0110 |
Polyethylene edge protectors
- the ideal edge protection for all sensitive and fragile transport goods
- Protect safely when using lashing or bundle straps, the wide bearing surface distributes the tensioning pressure in a favorable ratio
Without threading slot
| Article no. | Article |
| 0600 0014 | Edge protection angle 50mm |
With threading slot
| Article no. | Article |
| 0600 0023 | Edge protection angle 50mm |
BoKas aluminum edge protection angle
- for vertical and horizontal paper roll transport
- extra sturdy design
- with anti-slip coating on the support side
- recommended by paper mills
- for belt width 50 mm
| Article no. |
| 0600 0063 |
Metal edge protectors
- large area pressure distribution
- optimal for chipboard transports
- for belt width 50 mm
| Article no. |
| 0600 0024 |
Edge protection rails
Edge protection rail, red
- 19 mm material thickness (double-webbed sheet)
- Weight: 2.2 kg/m
- High formula elasticity
- Special lengths on request
| Article no. | Length in m | Dimension mm Leg length |
| 0600 0045 | 0,40 | 190 x 190 |
| 0600 0049 | 0,60 | 190 x 190 |
| 0600 0044 | 0,80 | 190 x 190 |
| 0600 0038 | 1,00 | 190 x 190 |
| 0600 0037 | 1,20 | 190 x 190 |
| 0600 0046 | 2,00 | 190 x 190 |
| 0600 0050 | 2,40 | 190 x 190 |
| 0600 0036 | 6,00 | 190 x 190 |
Edge protection rail, black
- Polypropylene with cutouts in the edge
- no edge damage due to hollow space inside the edge protection bracket
- Belt fixation by 50 mm side guide
- Lightweight, highly flexible and impact resistant
- suitable for securing palletized paving stones, beverage crates or precast concrete parts
- different length versions
| Article no. | Dimension in mm | Weight in g |
| 0600 0092 | 400 x 185 x 185 | 600 |
| 0600 0093 | 800 x 185 x 185 | 1200 |
| 0600 0094 | 1150 x 185 x 185 | 1800 |
Edge protection hoses
Edge protection hose, PES fabric protection hose, yellow
| Article no. | For belt width mm |
| 5562 0493 | 50 |
The following video shows the application of the flexible fabric hose as abrasion and cut protection:
Abrasion protection
PVC-ARS abrasion protection hose
| Article no. | For belt width mm |
| 5500 0040 | 25 |
| 5500 0050 | 35 |
| 5500 0060 | 50 |
| 5500 0100 | 75 |
PU-ARS abrasion protection hose
| Article no. | For belt width mm |
| 5500 2040 | 25 |
| 5500 2050 | 35 |
| 5500 2060 | 50 |
| 5500 2100 | 75 |
DoFlex1 abrasion protection
Innovative: The transversely elastic PES protective hose for lashing straps reliably protects the lashing strap over the entire wear zone. The abrasion resistance values are significantly better than those of conventional PVC and PU-Tex protective hoses
- no slipping
- abrasion resistant materials
- better distribution of the preload force
- the hose is especially thin and flexible, can be easily wound up with the loose end
| Article no. | Dimension/mm |
| 5562 0501 | 50 |
DoFlex2 abrasion protection with Dyneema®
Particularly robust: The elastic weave construction, made of the cut-resistant Dyneema® fiber, makes the DoFlex2 protective sleeve an ideal protection for lashing straps that are exposed to extreme loads in terms of abrasion and sharp-edged loads.
| Article no. | Dimension/mm |
| 5562 0503 | 50 |
Edge glider
DoLex edge glider
| Article no. | For belt width mm |
| 5597 0025 | 25 |
| 5597 0035 | 35 |
| 5597 0050 | 50 |
| 5597 0075 | 75 |
Edge protection underlays
DoLex edge protection carpet pad
| Article no. | For belt width mm |
| 0600 0025 | 25 |
| 0600 0019 | 35 |
| 0600 0018 | 50 |
| 0600 0090 | 75 |
DoLex edge protector with threading slot
- no more threading necessary
- Fast positioning at the wear zone
- Special dimensions on request
| Article no. | For belt width mm |
| 0600 0026 | 50 |
Edge protection for lifting slings and round slings
Select the edge protection according to the width of your lifting strap or round sling. In the tables below you will find the indication for which load capacities (round slings) or webbing widths the different protective hoses are suitable.
Edge protection angles for lifting slings and round slings
DoLex lifting strap edge protection angle made of polyurethane (PU) with perforated plate insert for even load distribution
| Article no. | For belt width mm | Dimensions mm | ||||
| L | B | Ba | H | Ha | ||
| 4511 0030 | 30 | 100 | 40 | 50 | 10 | 20 |
| 4511 0060 | 60 | 100 | 70 | 80 | 12 | 30 |
| 4511 0090 | 90 | 100 | 100 | 110 | 12 | 30 |
| 4511 0120 | 120 | 100 | 135 | 145 | 12 | 30 |
| 4511 0150 | 150 | 150 | 160 | 170 | 12 | 30 |
| 4511 0180 | 180 | 150 | 190 | 200 | 12 | 30 |
| 4511 0240 | 240 | 200 | 280 | 300 | 15 | 40 |
| 4511 0300 | 300 | 200 | 320 | 340 | 20 | 45 |
DoLex lifting belt edge protectors made of polyurethane (PU)
| Article no. Without magnet |
Article no. With magnet |
For belt width up to mm |
| 4540 0025 | 4541 0025 | 25 |
| 4540 0040 | 4541 0040 | 40 |
| 4540 0065 | 4541 0040 | 65 |
| 4540 0075 | 4541 0040 | 75 |
| 4540 0100 | 4541 0040 | 100 |
| 4540 0125 | 4541 0040 | 125 |
| 4540 0150 | 4541 0040 | 150 |
| 4540 0200 | 4541 0040 | 200 |
| 4540 0300 | 4541 0040 | 300 |
DoLex edge protection angle with joint and magnet
| Article no. | For belt width mm | Quantity magnets |
| 4511 0061 | 60 | 2 |
| 4511 0091 | 90 | 2 |
| 4511 0121 | 120 | 4 |
| 4511 0151 | 150 | 4 |
| 4511 0181 | 180 | 4 |
| 4511 0241 | 240 | 6 |
| 4511 0301 | 300 | 8 |
Profile hoses for lifting slings and round slings
DoLex profiled hoses are also produced with an additional glass fleece insert in the PU potting for particularly tough applications. Please inquire!
DoLex edge protection profile hoses for 4-ply lifting straps are also available from us on request.
DoLex 1 profile hoses
DoLex profile hoses are easily slidable and replaceable due to a special textile insert. This is the only way to safely turn a sharp-edged load. The following effect is achieved with DoLex profile hoses: When the load (e.g. a coil) is lifted, the hose adheres immovably to the edge of the transported goods. The lifting strap slides in the profiled hose and is free to stretch and position itself under the increasing load.
TIP: The DoLex profile hose must be significantly shorter than the lifting strap so that the hose has sufficient space on each side to slide on the lifting strap.
DoLex profile hose, smooth on one side
| Article no. | For 2-ply lifting straps up to belt width mm |
For round slings | |
| after fig. 3 and 4 | after fig. 5 and 6 | ||
| 5598 0500 | 30 | – | 500 kg / 1000 kg |
| 5598 0600 | 50 | – | 1500 kg / 2000 kg |
| 5598 0700 | 60 | 500 kg / 1000 kg | – |
| 5598 0800 | 75 | – | – |
| 5598 1001 | – | 1500 kg / 2000 kg | 3000 kg |
| 5598 1000 | 90 | 3000 kg | 4000 kg |
| 5598 1350 | 120 | 4000 kg | 5000 kg / 6000 kg |
| 5598 1500 | – | 5000 kg / 6000 kg | 8000 kg / 10.000 kg |
| 5598 1600 | 150 | – | 12.000 kg / 15.000 kg |
| 5598 1900 | 180 | 8000 kg | 20.000 kg |
| 5598 2322 | – | 10.000 kg / 12.000 kg | 25.000 kg |
| 5598 2515 | 240 | – | – |
| 5598 2500 | – | 15.000 kg | – |
| 5598 3200 | 300 | 20.000 kg / 25.000 kg | – |
DoLex profile hose, smooth on both sides
| Article no. | For 2-ply lifting straps up to belt width mm |
For round slings | |
| after fig. 3 and 4 | after fig. 5 and 6 | ||
| 5598 0502 | 30 | – | 500 kg / 1000 kg |
| 5598 0602 | 50 | – | 1500 kg / 2000 kg |
| 5598 0702 | 60 | 500 kg / 1000 kg | – |
| 5598 0802 | 75 | – | – |
| 5598 1012 | – | 1500 kg / 2000 kg | 3000 kg |
| 5598 1002 | 90 | 3000 kg | 4000 kg |
| 5598 1352 | 120 | 4000 kg | 5000 kg / 6000 kg |
| 5598 1502 | – | 5000 kg / 6000 kg | 8000 kg / 10.000 kg |
| 5598 1602 | 150 | – | 12.000 kg / 15.000 kg |
| 5598 1902 | 180 | 8000 kg | 20.000 kg |
| 5598 2002 | – | 10.000 kg / 12.000 kg | 25.000 kg |
| 5598 2402 | 240 | – | – |
| 5598 2512 | – | 15.000 kg | – |
| 5598 3302 | 300 | 20.000 kg / 25.000 kg | – |
DoLex 2 profile hoses with ribs
Like DoLex 1 profile hoses, DoLex 2 hoses with rib are slidable and replaceable. DoLex 2 with rib is equipped with longitudinal grooves on the side facing the transported material. This has the advantage that the transported material lies first on the ribs. The hose clings even better to the material to be lifted thanks to these beads and thus offers additional security against slipping. The ribbing also brings increased crush resistance. The textile insert hose inside allows the lifting strap to slide well.
DoLex profile hose, ribbed/smooth
| Article no. | For 2-ply lifting straps up to belt width mm |
For round slings | |
| after fig. 3 and 4 | after fig. 5 and 6 | ||
| 5598 0704 | 60 | 500 kg / 1000 kg | – |
| 5598 1004 | 90 | 3000 kg | 4000 kg |
| 5598 1354 | 120 | 4000 kg | 5000 kg / 6000 kg |
| 5598 1604 | 150 | – | 12.000 kg / 15.000 kg |
| 5598 1804 | 180 | 8000 kg | 20.000 kg |
| 5598 2404 | 240 | – | – |
| 5598 3204 | 300 | 20.000 kg / 25.000 kg | – |
DoLex 2 profile hoses with rounded edge
The DoLex 2 profile hoses with rounded edge are a further development of the DoLex 1 edge protection. Due to the rounded edges, this DoLex 2 hose offers increased protection against strap crushing at the bend point of the lifting strap. In addition, the greater flexibility of the hose ensures better handling.
DoLex profile hose, rounded edges/smooth on both sides
| Article no. | For 2-ply lifting straps up to belt width mm |
For round slings | |
| after fig. 3 and 4 | after fig. 5 and 6 | ||
| 5598 0614 | 50 / 60 | 500 kg / 1000 kg | 1500 kg / 2000 kg |
| 5598 1114 | 90 | 3000 kg | 4000 kg |
| 5598 1364 | 120 | 4000 kg | 5000 kg / 6000 kg |
| 5598 1514 | 150 | – | 12.000 kg / 15.000 kg |
| 5598 1814 | 180 | 8000 kg | 20.000 kg |
| 5598 2424 | 240 | – | – |
| 5598 3214 | 300 | 20.000 kg /25.000 kg | – |
Edge protection mats for lifting slings and round slings
DoPremium edge protection mat with Velcro fastening system, 6 mm overlay thickness
Flexible, particularly cut-resistant edge protector with 6 mm material thickness. Quick assembly for round slings and lifting slings by means of Velcro. Universally applicable on sharp-edged loads with uniform edge expression.
| Article no. | For round slings WLL / t | For lifting straps Width / mm |
Support width in mm |
Length in mm |
|
| Dyneema® | Polyester | ||||
| 0500 0080 | 6/8 | 3/4 | 60 | 80 | 300 |
| 0500 0100 | 10/12 | 5/6 | 75/90 | 110 | 400 |
| 0500 0150 | 15/20 | 6/8 | 100/120 | 130 | 500 |
| 0500 0300 | 25/30 | 10/12 | 150 | 160 | 600 |
| 0500 0400 | 35/40 | 15/20 | 180 | 190 | 700 |
| 0500 0500 | 50/60 | 25/30 | 200 | 230 | 800 |
| 0500 0700 | 70/80 | 35/40 | 240 | 260 | 800 |
| 0500 1000 | 90/100 | 45/50 | – | 290 | 800 |
| 0500 1250 | 125 | 60 | 300 | 310 | 800 |
Heavy duty edge protection angle
DoLex heavy duty edge protection angle with steel insert
| Article no. | For fire width up to mm |
Dimensions mm | Weight kg |
||||
| a | b | c | d | e | |||
| 4517 0030 | 30 | 35 | 60 | 100 | 12 | 6 | 0,80 |
| 4517 0060 | 60 | 65 | 90 | 100 | 12 | 6 | 1,60 |
| 4517 0090 | 90 | 95 | 120 | 100 | 12 | 6 | 2,40 |
| 4517 0120 | 120 | 130 | 160 | 100 | 15 | 8 | 3,20 |
| 4517 0150 | 150 | 160 | 190 | 100 | 15 | 8 | 4,00 |
| 4517 0180 | 180 | 190 | 220 | 100 | 15 | 8 | 4,80 |
| 4517 0240 | 240 | 250 | 280 | 100 | 15 | 8 | 6,40 |
| 4517 0300 | 300 | 310 | 340 | 100 | 15 | 8 | 8,00 |
DoLex heavy duty edge protection bracket, with magnet, with steel inlay
| Article no. | For fire width up to mm |
Dimensions mm | Magnets optional |
Weight w. magnetskg |
||||
| a | b | c | d | e | ||||
| 4518 0030 | 30 | 35 | 60 | 100 | 12 | 6 | 2 | 0,90 |
| 4518 0060 | 60 | 65 | 90 | 100 | 12 | 6 | 2 | 1,70 |
| 4518 0090 | 90 | 95 | 120 | 100 | 12 | 6 | 2 | 2,50 |
| 4518 0120 | 120 | 130 | 160 | 100 | 15 | 8 | 4 | 3,40 |
| 4518 0150 | 150 | 160 | 190 | 100 | 15 | 8 | 4 | 4,20 |
| 4518 0180 | 180 | 190 | 220 | 100 | 15 | 8 | 4 | 5,00 |
| 4518 0240 | 240 | 250 | 280 | 100 | 15 | 8 | 6 | 6,70 |
| 4518 0300 | 300 | 310 | 340 | 100 | 15 | 8 | 8 | 8,40 |
Protective hoses for round slings
Mounting examples for edge protection hoses
PVC protective hose
| Article no. | Wear protection hoses according to | |
| Fig. 3 u. 4 | Fig. 5 u. 6 | |
| for round slings with WLL in kg | ||
| 5500 0050 | – | 500/1000 |
| 5500 0060 | – | 1500/2000 |
| 5500 0080 | 500-2000 | 3000 |
| 5500 0100 | 3000 | 4000/5000 |
| 5500 0120 | 4000/5000 | 6000 |
| 5500 0160 | 6000/8000 | 8000/10.000 |
| 5500 0200 | 10.000/12.000 | 12.000/15.000 |
| 5500 0240 | 15.000 | 20.000/25.0000 |
| 5500 0300 | 20.000/25.000 | 30.000 |
PU-Tex protective hose
| Article no. | Wear protection hoses according to | |
| Fig. 3 u. 4 | Fig. 5 u. 6 | |
| for round slings with WLL in kg | ||
| 5500 2050 | – | 500/1000 |
| 5500 2065 | – | 1500/2000 |
| 5500 2080 | 500-2000 | 3000 |
| 5500 2100 | 3000 | 4000/5000 |
| 5500 2160 | 6000/8000 | 8000/10.000 |
| 5500 2200 | 10.000/12.000 | 12.000/15.000 |
| 5500 2250 | 15.000 | 20.000/25.0000 |
| 5500 2300 | 20.000/25.000 | 30.000 |
DoPremium edge protection hose, thickness 6 mm
Edge protection sleeves made of Dyneema® offer round slings optimum protection against sharp edges. The service life of the textile slings is significantly extended or even makes it possible to use them for certain sharp-edged loads in the first place.
Your advantages
- Very high cut resistance on sharp-edged loads with uniform edge formation
- High bending strength at the load
- Low elongation
- Lower own weight compared to other edge protection products
| Article no. | Flat width in mm |
For single strand (RS) | For double strand (RS) | For strip width/mm PES |
||
| Dyneema® WLL t |
PES WLL t |
Dyneema® WLL t |
PES WLL t |
|||
| 5562 0508 | 85 | 10 – 12 | 6 – 8 | 6 | 3 – 4 | 60 |
| 5562 0511 | 115 | 15 – 20 | 10 – 12 | 8 | 5 – 6 | 75 – 90 |
| 5562 0519 | 135 | 25 – 30 | 15 – 20 | 10 | 6 – 8 | 100 |
| 5562 0516* | 160 | 40 – 45 | 25 | 20 – 25 | 10 – 12 | 120 |
| 5562 0519* | 190 | 50 – 60 | 30 – 35 | 30 – 35 | 15 | 150 |
| 5562 0523* | 230 | 70 – 80 | 40 – 45 | 40 – 45 | 20 – 25 | 180 |
| 5562 0526* | 260 | 90 – 100 | 50 | 50 – 60 | 30 | 240 |
| 5562 0529* | 290 | 125 | 60 – 70 | 70 – 80 | 35 – 40 | – |
Lifting slings with fixed coating
Fixed coatings with a minimum thickness of 5mm are particularly advantageous when small loads with a narrow material width have to be lifted in a U-shape and the useful length of the lifting sling is very short. Here, the fixed coating offers more flexibility than a short and therefore relatively stiff hose. The DoLex fixed coatings are tightly encapsulated with the lifting or iron-on tape and are transparent – so that the fabric tape can be inspected. However, the DoLex fixed coating should only be selected if the load cannot move in the strip, i.e. there is no relative movement between the coating and the load. For lifting operations with relative movements, the DoLex profile hoses are then preferable.
Please note: Fixed coatings are not suitable for turning sharp-edged loads!
DoLex iron-on tapes DH 100, with 1-sided fixed coating
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05129602 | 1000 | 2000 | 30 x 7 | |
| 05129752 | 2000 | 4000 | 60 x 7 | |
| 05129782 | 3000 | 6000 | 90 x 7 | |
| 05129852 | 4000 | 8000 | 120 x 7 | |
| 05120002 | 5000 | 10.000 | 150 x 7 | |
| 05120102 | 6000 | 12.000 | 180 x 7 | |
| 05120202 | 8000 | 16.000 | 240 x 7 | |
| 05120302 | 10.000 | 20.000 | 300 x 10 | |
DoLex iron-on tapes DH 100, with 2-sided fixed coating
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05139602 | 1000 | 2000 | 30 x 7 | |
| 05139752 | 2000 | 4000 | 60 x 7 | |
| 05139782 | 3000 | 6000 | 90 x 7 | |
| 05139852 | 4000 | 8000 | 120 x 7 | |
| 05130002 | 5000 | 10.000 | 150 x 7 | |
| 05130102 | 6000 | 12.000 | 180 x 7 | |
| 05130202 | 8000 | 16.000 | 240 x 7 | |
| 05130302 | 10.000 | 20.000 | 300 x 10 | |
Additional, cast-in metal cut protection insert for DoLex hoses and fixed coatings
| Color | For belt width mm |
| 30 | |
| 60 | |
| 90 | |
| 120 | |
| 150 | |
| 180 | |
| 240 | |
| 300 |
DoLex lifting slings with 1-sided fixed coating, one side with loop, other side with lacing hook HSH
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05289682 | 1000 | 2000 | 30 x 7 | |
| 05289752 | 2000 | 4000 | 60 x 7 | |
| 05289782 | 3000 | 6000 | 90 x 7 | |
| 05289852 | 4000 | 8000 | 120 x 7 | |
| 05280082 | 5000 | 10.000 | 150 x 7 | |
DoLex lifting straps with 2-sided fixed coating, one side with loop, other side with G-hook
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05299682 | 1000 | 2000 | 30 x 7 | |
| 05299752 | 2000 | 4000 | 60 x 7 | |
| 05299782 | 3000 | 6000 | 90 x 7 | |
| 05299853 | 4000 | 8000 | 120 x 7 | |
| 05290082 | 5000 | 10.000 | 150 x 7 | |
| 05290182 | 6000 | 12.000 | 180 x 7 | |
| 05290282 | 8000 | 16.000 | 240 x 7 | |
| 05290382 | 10.000 | 20.000 | 300 x 10 | |
DoLex lifting straps with 1-sided fixed coating, loop type A
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05689602 | 1000 | 2000 | 30 x 7 | |
| 05689752 | 2000 | 4000 | 60 x 7 | |
| 05689782 | 3000 | 6000 | 90 x 7 | |
| 05689852 | 4000 | 8000 | 120 x 7 | |
| 05680002 | 5000 | 10.000 | 150 x 7 | |
| 05680102 | 6000 | 12.000 | 180 x 7 | |
| 05680202 | 8000 | 16.000 | 240 x 7 | |
| 05680302 | 10.000 | 20.000 | 300 x 10 | |
DoLex lifting straps with 2-sided fixed coating, loop type A
| Color | Article no. | Load capacity in kg |
Strip dimensions in mm |
|
| simply | double | |||
| 05699602 | 1000 | 2000 | 30 x 7 | |
| 05699752 | 2000 | 4000 | 60 x 7 | |
| 05699782 | 3000 | 6000 | 90 x 7 | |
| 05699852 | 4000 | 8000 | 120 x 7 | |
| 05690002 | 5000 | 10.000 | 150 x 7 | |
| 05690102 | 6000 | 12.000 | 180 x 7 | |
| 05690202 | 8000 | 16.000 | 240 x 7 | |
| 05690302 | 10.000 | 20.000 | 300 x 10 | |
In the case of slippery, smooth, oily or greasy surfaces, both the fixed coatings and the profiled hoses can be equipped with a granular surface protection or with a surface roughening. Additional DoLex fixed coating variants are available on request:
Edge protection for chains and ropes
Edge protectors for chains and ropes
DoLex edge protection angle
| Article no. | Diameter in mm | Length in mm |
| 4515 0030 | 30 | 80 |
| 4515 0040 | 50 | 125 |
Not found the right edge protector ?
Perhaps you will find what you are looking for in our online store. Here you will also find other load securing products. An overview of the different hooks for lifting slings and round slings can be found here.
Edge protectors are available in various designs, sizes and load capacities. Our technical advisors will be happy to help you!
Phone: + 49 (0) 231 81 81
Fax: + 49 (0) 231 82 77 82
Email:info@dolezych.de
Bleiben Sie auf dem Laufenden mit dem Dolezych-Newsletter! Hier geht’s zur Anmeldung.